Table of Contents
Advertisement
(3) When installing the detector at the positon A, place it to the oposite direction to avoid stressing the
detector code.
(4) Refer to the PLK-G1010 Sewing Machine Head version instruction manual (7-21. Adjustment of the
X-Y mechanical home position), and adjust the home position.
CAUTION
・The clamp mechanism and wiper could interfere depending on the home position.
・The detector cable could collide with the detector plate X, so fix it to the bed with a nylon clip.
[Note] The shaded section below is the optimum range for moving the home position.
- 9 -
Advertisement
Table of Contents
