Clatronic CD-K 642 Instruction Manual & Guarantee page 32

REPEAT (18)
GB
When a CD is being played the REPEAT button has a repeat function. First start
the CD and then press the REPEAT button.
Press once (REPEAT display (17) fl ashes):
Press twice (REPEAT display (17) lights up): The entire CD is repeated conti-
Press three times:
Programmed Repeat with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the STOP key (5).
2. Press the PROGRAM key (16). „0" appears in the display. Use the SKIP/
SEARCH +/- buttons (2) to select the desired track and then press the
PROGRAM button (16) again.
3. Select the next track with the SKIP/SEARCH +/- key (2) and press the
PROGRAM key (16) again. Repeat the procedure until all the desired tracks
are selected.
4. Press the
numbers are shown in the display in the correct order. Press this button to
pause briefl y the playback (see PLAY/PAUSE section).
5. Press once the
gram.
6. In order to play the programme again, fi rst press the PROGRAM button (16)
once and then the
7. To delete the program press the PROGRAM button in stop mode and then the
STOP button.
The device stops automatically once the entire sequence of programmed tracks
is completed. The programmed order of tracks remains in the memory until the
CD is removed from the CD compartment or the device is switched off.
It is possible to combine the programmed tracks with the repeat function. After
you have programmed and started the device, please press the REPEAT button
(18) up to three times and then you can use the functions as described under
„REPEAT".
32
5....-05-CD-K 642 32
/ II PLAY/PAUSE key (11). The playback starts. The selected track
STOP key (5) to stop the playback while retaining the pro-
/ II PLAY/PAUSE button (11).
The current track is repeated conti-
nuously.
nuously.
The function is deactivated.
30.08.2004, 14:38:35 Uhr