Initialize
Initializes the setting to the default setting.
Even if you execute this function, the images are retained.
1 Tap [MENU] t [Main Settings] t [Initialize] t
[OK].
Note
• Perform initialization after charging the camera to prevent the camera from turning off during the
process.
• The following Wi-Fi connection settings are also initialized:
– Login information for each network service
– Wi-Fi access point information
z
When the camera does not work properly
Press and hold the ON/OFF (Power) button for at least 7 seconds, and force-quit the camera
(page 13). Then turn the camera on again.
54
US