Blender Operation - Back to Basics Blender Solution 5500 User Manual

BLENDER SOLUTION CONTROL BUTTONS
OFF shuts off the
machine.
MEDIUM runs the Blender
Solution at medium speed.
™
LOW runs the Blender
Solution at low speed.
™
This speed should be used
for the initial 30 seconds
of mixing as well as for
dispensing.
1. Assemble the blender blade base onto the glass mixing jar.
2. Add ingredients to the mixing jar and replace the lid. You may add
more ingredients through the hole in the center of the lid. (Note: Add
liquid ingredients first, then add frozen or solid ingredients. This will prevent
excessive wear and stress on the motor.) Cover the hole with the clear lid
cap or stir stick during operation.
3. TO START BLENDING: Choose a speed for blending the ingredients on the
dial switch and then press the ON button.
4. TO STOP BLENDING: To stop the blending process, push the OFF button.
5. PULSE MODE: The PULSE button allows you to create short bursts
of power. To use the PULSE function, repeatedly push and release
the PULSE button. The PULSE function should be used in the initial
stage of blending ice and frozen ingredients for smoothies and other
frozen drinks. The PULSE function should also be used to break apart
larger pieces of food or to control the texture of food when chunkier results
are desired.
OPERATION

BLENDER OPERATION

9
ON turns on the
machine.
PULSE runs the
Blender Solution
™
at high speed.
HIGH runs the Blender
Solution at high speed. This
™
speed should be used for the
final stages of mixing. Do not
use this speed for dispensing.