Page 2 Samart-Box KB 12 User Guide What’s Included With The Smart-Box KB 12 1 x Mounting Sticker 2 x Screws Anchors 2 x Mounting Screws 1 x KB 12 Smart-Box Or 1 x KB 12Plus Smart-Box Key Storage Unit...
Page 3 Features Lock & Unlock User Unlock ..This Smart-Box allows to add up to 100 user PIN codes for Administrator Unlock your family, friends and Set a Master Administrator PIN visitors. for unlocking, settings, operations etc. and only the Auto Locking administrator could change the If there is no opening motions...
Page 4
Page 4 Step 2>Wall Mounting There are 2 screw holes on the Smart-Box and use the screws and the screw anchors in the package to fix the Smart-Box Step 1 Smart-Box >The Smart-Box was initialized from factory already, if need it to be initialized please follow the steps below.
Page 5
Page 5 >3. Keep Mobile Bluetooth on and back to the Smart-Box then Press the “Reset ” button one time only and Blue led light on(Enter Button) . >4. Once you see the Blue LED on you need to Key in Administrator password(123456) then press “Enter Button”...
Page 7
Page 7 Step 3>Add Administrator Password(Under Initialized Mode) >1. Long press the Enter Button for 3 seconds. >2. Key in new password(more than 4 digits). >>>3.Press Enter Button in the middle to confirm the password. >>>>4.Key in the new password again and press Enter Button to complete Enter Button Press the Enter Button for adding and confirming password...
Page 8 Step 5>Testing >1. Unlock the Smart-Box with Administrator Password. >2. Unlock the Smart-Box with User Password. >>>3. Lock the Smart-Box by closing back the front assembly, motor rolls up and locked >>>>4. if everything worked well then move to Mobile control. Motor pushs up the Lock Bolt Trigger Latch Manage Users...
Page 9
Page 9 Tips Sounds & Lights : >1. Press any Button -------“Beep with green on the enter button” . >2. Successfully added passwords and correct password ------Green flashes with sound “ >3. Improper operations and wrong passwords-------3 red flashes with sound“ >4.
Need help?
Do you have a question about the KB 12 and is the answer not in the manual?
Questions and answers