Problem Solving; Waste Disposal - Krups NESPRESSO PROGRAMATIC 554 Instructions For Use Manual

Problem Solving

PROBLEM:
The coffee temperature is too low .
SOLUTION:
see the section "Pre-warming Espresso
Cups"
Leave the capsule holder in the appliance.
PROBLEM:
The pump makes a loud noise.
SOLUTION:
Make sure that the water container is full.
Make sure that the water container is
correctly inserted.
PROBLEM:
Too little froth when frothing up.
SOLUTION:
Clean the steam/hot water nozzle and/or
the frothing aid.
The milk should not be too old or too
warm; it should be at refrigerator
temperature.
PROBLEM:
The coffee does not run out.
SOLUTION:
Check the water container has been filled.
Check the water container is correctly
inserted.
Check whether the capsule holder is
blocked.
20
Check whether the capsule cage is dirty.
Do this by removing the capsule holder
and then pressing the
does not run out in two quite visible
streams, the capsule cage must be taken
out and cleaned (see section "Cleaning").
Check whether the machine has been
satisfactorily descaled.
PROBLEM:
Coffee runs out at the side of the capsule
holder.
SOLUTION:
Check that the capsule holder has been
tightened up sufficiently.
Clean the capsule holder.
For other questions, please get in touch with
your Nespresso Club.

Waste Disposal

The packaging consists entirely of
environmentally-friendly materials, which
should be passed on to the local recycling
body. Arrangements for the disposal of old
appliances can be found by enquiring at the
local authority.
key. If the water