Table of Contents
Advertisement
Service
The LightViper equipment contains no user-serviceable components: refer to qualified service
personnel for repair or upgrade. Your warranty will be voided if you tamper with the internal
components. If you have any questions with regard to the above, please contact FiberPlex.
In the event your LightViper equipment needs to be upgraded or repaired, it is necessary to
contact FiberPlex prior to shipping, and a Return Materials Authorization (RMA) number will be
assigned. This number will serve as a reference for you and helps facilitate and expedite the
return process. FiberPlex requires that shipments be pre-paid and insured —unless otherwise
authorized in advance.
IMPORTANT: ANY SHIPMENT THAT IS NOT PRE-PAID OR IS SENT WITHOUT AN RMA NUMBER
WILL NOT BE ACCEPTED.
Disposal
Disposal of Packing Materials
The packing materials have been selected with environmental and disposal issues in mind. All
packing material can be recycled. Recycling packing saves raw materials and reduces the
volume of waste. If you need to dispose of the transport packing materials, please try to use
recyclable means.
Disposal of Used Equipment
Used equipment contains valuable raw materials as well as materials that must be disposed of
professionally. Please return your used equipment via an authorized specialist dealer or via the
public waste disposal system, ensuring any material that can be recycled is. Please take care
that your used equipment cannot be abused. After having disconnected your used equipment
from the mains supply, make sure that the mains connector and the mains cable are made
useless.
Declarations of Conformity
Class A Equipment - FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the
35YD
interference at his own expense.
Disclaimer
The information in this document has been carefully checked and is believed to be accurate at
the time of publication. However, no responsibility is taken by us for inaccuracies, errors, or
omissions, nor is any liability assumed for any loss or damage resulting either directly or
indirectly from use of the information contained within it.
8
Advertisement
Table of Contents
