Advertisement
Quick Links
Lumination
LRXD
®
Lumination
(LRXD Series)
New Construction Frame
BEFORE YOU BEGIN/
AVANT DE COMMENCER
Read these instructions completely and carefully.
Lisez attentivement toutes ces instructions.
Risk of electrical shock. Turn power off before inspection, installation or removal. Properly ground electrical enclosure.
Risques d'incendie ou de décharges électriques. Coupez l'alimentation avant d''inspecter, installer ou déplacer le luminaire. Assurez-vous de
correctement mettre à la terre le boîtier d'alimentation électrique.
Risk of fire. Follow all NEC and local codes. Use only UL approved wire for input/output connections.
Risques d'incendie. Respectez tous les codes NEC et codes locaux. N'utilisez que des fils approuvés par UL pour les entrées/sorties de connexion.
Lamp Housings LRXDR4, LRXDR6, LRXDS4, LRXDS6 may be assembled with part FRAMExR/FRAMExS. When Lamp Housings LRXDR4, LRXDR6, LRXDS4,
LRXDS6 is assembled with Part FRAMExR/FRAMExS, the final assembly complies with UL1598 category IFAO recessed luminaire requirements.
LRXD products are suitable for wet location covered ceiling only.
Les boîtiers de lampes LRXDR4, LRXDR6, LRXDS4, LRXDS6 peuvent être montés avec la pièce FRAMExR/FRAMExS. Lorsque les boîtiers des lampes
LRXDR4, LRXDR6, RXDS4, LRXDS6 sont montés avec la pièce FRAMExR/FRAMExS, le montage final respecte les exigences des luminaires encastrés de
la catégorie IFAO de la norme UL 1598. LRXD produits conviennent pour emplacement humide couverte au plafond uniquement.
Save These Instructions
Use only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
LED Luminaire
®
WARNING/AVERTISSEMENT
Installation Guide/Manuel d'installation
NOTICE
Prepare Electrical Wiring
Electrical Requirements
• The LED luminaire must be connected to the mains
supply according to its ratings on the product label.
Grounding Instructions
• The grounding and bonding of the overall system
shall be done in accordance with National Electric
Code (NEC) and local codes.
IND585| A-1028965
Advertisement
Related Manuals for Daintree GE Current Lumination LRXD Series
Summary of Contents for Daintree GE Current Lumination LRXD Series
- Page 1 Lumination LRXD Installation Guide/Manuel d’installation ® IND585| A-1028965 Lumination LED Luminaire ® (LRXD Series) New Construction Frame BEFORE YOU BEGIN/ AVANT DE COMMENCER Read these instructions completely and carefully. Lisez attentivement toutes ces instructions. WARNING/AVERTISSEMENT Risk of electrical shock. Turn power off before inspection, installation or removal. Properly ground electrical enclosure. Risques d’incendie ou de décharges électriques.
- Page 2 Lumination LRXD Installation Guide/Manuel d’installation ® Components Provided Item Qty. 1 Frame (4-inch, 6-inch) 2 Mounting brackets 3 L-Bracket 4 U-Bracket (used only with RC/LRC Series Installs) 5 Wing nut Note: Part 4 are only for RC/LRC product, Part 5 are only for LRX product. Alternative Option A: Fixture...
- Page 3 Lumination LRXD Installation Guide/Manuel d’installation ® Black White Dimming + Violet Gray Secure provided junction box to the building Ground Green/Yellow structure or existing frame per local codes. If necessary, remove existing junction box. Connect AC conduit to provided junction box and connect the black, white, and green/ yellow wires of the AC leads to the black, white, and green wires using listed wire...
- Page 4 Lumination LRXD Installation Guide/Manuel d’installation ® FCC Statements/Déclarations FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.