Canon SPEEDLITE EL-1 Advanced User's Manual page 119

< > Lamp and Connection Indication
You can check the transmission status by the lighting status of the <
icon on the LCD panel.
Status Description
Lit Transmission OK
Off Not connected
Off Too many units
Blinking Error
Lit
Transmission OK*
Lit
Transmission OK*
* 1: When sender side is connected to the sub-sender
* 2: When the sender side is connected for continuous shooting
Display
Transmission OK
/
/
/
Transmission OK*
* 1: When sender side is connected to the sub-sender
Caution
If the transmission channels of the sender unit and receiver unit are different, the
receiver unit will not fire. Set both to the same number or set both to "AUTO".
If the wireless radio IDs of the sender unit and receiver unit are different, the
receiver unit does not fire. Set to the same number.
Checking the channel and ID
Set the total number of sender and receiver units to 16 or less.
Turn the sender unit and receiver unit off and on again.
1
2
Description
Not connected Checking the channel and ID
Set the total number of sender and receiver units to 16 or
Too many units
less.
Error Turn the sender unit and receiver unit off and on again.
1
Action
–
–
–
Action
119
> lamp or the
–
–