Canon SPEEDLITE EL-1 Advanced User's Manual page 175

Table of Contents

Advertisement

6.
Set the flash mode to <
Press the joystick up, down, left, or right, or turn <
<
>, then press the joystick vertically.
The receiver unit is set automatically to <
controlled by the sender unit.
Check that the firing group control is set to <
7.
Check that the flash is ready.
When the receiver flash is ready, the AF-assist beam emitter blinks at
approx. 1-second intervals.
Check that the sender unit's flash-ready lamp is lit.
>.
175
> and select
> during shooting,
>.

Advertisement

Table of Contents
loading

Table of Contents