Radio Transmission Wireless Flash Shooting
This chapter describes how to use strobe shooting using the radio transmission wireless
sender / receiver function.
See the system map (
shooting.
Caution
When the camera's shooting mode is set to a fully automatic mode or a Basic Zone
mode, the operations in this chapter are not available. Set the camera's shooting
mode to <
zone).
When prioritizing radio transmission wireless flash shooting, do not operate the
power switch, open the battery storage unit cover, etc. The wireless connection will
be terminated.
Note
The EL-1 attached to the camera is called a "sender unit" while the Speedlite
controlled wirelessly is called a "receiver unit".
The EL-1 allows remote release (remote shooting) from the receiver unit (
details, refer to the Instruction Manual of the Speedlite that is equipped with the
remote release function.
•
Radio Transmission Wireless Flash Shooting
•
Radio Transmission Wireless Settings
•
Automatic Flash Photography with 1 Flash Receiver
•
Automatic Flash Photography with Receivers divided into 2 Groups
•
Automatic Flash Photography with Receivers divided into 3 Groups
•
Wireless Multiple Flash Shooting with a set Flash Ratio
•
Shooting in a Different Flash Mode for Each Group
•
Test Flash / Modeling Flash from a Receiver Unit
•
Remote Release from a Receiver Unit
•
Linked Shooting with Radio Transmission
) for the accessories required for radio transmission wireless flash
> <
> <
> <
> <
> <bulb (
102
)> (Advanced shooting
). For