Download Print this page

Black Ridge WFX-1503A Instruction Manual

Air nibbler

Table of Contents

Need help?

Do you have a question about the WFX-1503A and is the answer not in the manual?

Page 2: Warranty
Model: WFX-1503A Stroke: 3600 RPM Our goods come with guarantees that cannot be excluded under the Australian Recommended Operating Pressure: 90 PSI (6.2 BAR) Consumer Law.
Page 3: Operation
• dress properly. Do not wear loose clothing or jewellery as they can be 1. Unscrew and remove the cutter’s sleeve (#1). caught in moving parts. Protective, electrically non-conductive clothes and 2. Unscrew and remove the nut (#2). non-skid footwear are recommended when working. Wear restrictive hair 3.
Page 4: Parts List
parts lIst • If the length of the air hose you are using is within 3m, then it is recommended that a hose with an inner diameter of 8mm is used. • If the length of the air hose you are using is within 7m but longer than 3m, then it is recommended that a hose with an inner diameter of 10mm or 12mm is used.
Page 5: Troubleshooting
troubleshootInG no. description quantity no. description quantity problem cause solutIon Hexagon Nut Planet Gear Tool doesn’t run at a Air supply is not Check the air hose to see Screw Gear Ring normal speed or at a sufficient. whether it is blocked or Connecting Rod Washer variable speed.