Download Print this page

Geneinno S2 User Manual page 22

Waterscooter
Hide thumbs Also See for S2:

Advertisement

V. Wireless connection and APP
When disconnected, APP will automatically log out of the device control page.
VI. Maintenance instructions
⚫ Do not leave the product in water when using. Be sure to take the
machine out of the water after use.
⚫ Please rinse the product with fresh water after use, and turn on self-
cleaning mode to prevent crystallization; place the machine in a dry and
cool environment for long-time storage.
⚫ Please do not use corrosive cleaning solvents or sharp brushes to clean
the product. Use smooth tools such as cotton cloth to clean the surface.
⚫ Please charge the battery within 24 hours after using the product.
⚫ Re-charge the battery every 6 months when not in use.
⚫ Keep the battery partially discharged (40-60%) and in cool, dry place
when not in use, where out of the reach of children and away from heat
and ignition sources.
⚫ Use the officially specified adaptor only.
⚫ The battery contains safety and protection devices inside, if damaged or
removed may cause battery failure or risk of over-heat and explosion.
⚫ Please keep the charging interface dry and clean, and make sure there is
no other materials attached to the charging interface;Keep the metal
pins of the charging interface free from obvious damage, scratch or rust.
⚫ Do not put the product into fire, under ultra-high/ultra-low temperature,
in inflammable, explosive or strong corrosive solvents nor in other
dangerous substances.
⚫ Do not subject the product to strong, continuous beat, shocks or impact.
⚫ Do not place heavy objects above the product; Do not piece the product
with sharp objects, nails, or strike with force.
Failure to comply with the above maintenance instructions will reduce the
battery life and power, and affect the product performance!
© 2018-2020 GENEINNO All Rights Reserved.
Menu bar:
History records:
Each record could be edited & shared.
Firmware:
device firmware version,
prompt update if not the latest version
(synchronous prompt in status bar).
Device information:
corresponding MAC code.
Restore factory settings:
settings to default.
Help:
instructions for starters.
keep the last ten records.
the device model and
restore all
9

Advertisement

loading

Related Products for Geneinno S2