Download Print this page

Getting Started - Geneinno S2 User Manual

Waterscooter
Hide thumbs Also See for S2:

Advertisement

IV. Getting started
IV.1 Start S2
Unlock the Safety Lock
Single-hand control is invalid under parental mode. Must press both hands to start.
When in parental mode, the LOGO light/speed indicator would be staying on.
IV.2 Shift gears manually
How to- Keep pressing the power button (left hand) and press the motor
button (right hand) twice to shift gears manually between low and high speed.
The shift gears manually is invalid under parental mode
IV.3 Battery charge
1. Ensure the magnetic charging interface and the adapter charging interface are dry and
clean, and no foreign materials attached. Ensure no water among the charging interfaces.
2. The LED light on adaptor is red when charging, Logo light will turn off after 30 seconds
breathing; The light on adaptor is green when battery is fully charged, in approximately
1.5-2 hours.
3. Please charge in a dry and ventilated environment.
© 2018-2020 GENEINNO All Rights Reserved.
Press both buttons to start;
Grab tight underwater
6

Advertisement

loading

Related Products for Geneinno S2