Ten-Haaft Oyster Vision II Quick Start Manual page 5

Error messages

"Card not formated or unsupported filesystem!"
The SD‐card can not be addressed physically (usually the card is electrically defective or not
formatted).

" No valid update files found on card!"
The card is formatted correctly, but does not contain correct information (system and card
do not match).

" No connection to device, no update possible!"
The control unit is under power, but has no secure connection to the system (cable
fault).

"Update process stopped! Re‐insert card to start a new update cycle."
This is not an error message, but a hint how you can restart after manual termination.

" No Bootloader! "
No Bootloader found  Production error!

"Hex‐File corrupt"
Fault in the internal structure of the hex or EEP file  read error or corrupt file

"... booting ... "
The control unit attempts to connect to the system (confirmed by "... terminated!").
Torsten Adam, tenHaaft GmbH 1 Page 5