1. PRECAUTIONS (SAFETY WARNINGS)
Upon electronic Control system repair/change, make sure the set is
●
unplugged. Beware of electric shock.
Use rated electronic Control equipment.
●
Make sure to check ModeL name, Rated voltage, Rated current, Operation
Temp, etc.
Do not use excessive force to separate wiring connectors. Ensure that all
●
wiring connectors are refitted correctly in the original position.
Upon repair, completely remove dust or other foreign substances from
●
housing, harness, connector, etc.
To prevent fire by tracking, short, etc.
Check whether water has penetrated into the electronic Control system.
●
If there is any kind of trace, take necessary measures such as related
component change, insulation tapping, etc.
After repair, check the assembled state of parts.
●
It should be the same as the original state.
Check the surrounding conditions.
●
Change the location, if the fridge is located at humid, wet places or the
installed state is unstable.
If needed, ground the fridge.
●
Especially, if there is a possibility of electric leakage, ground is indispensable.
Advise the customer if you see that the electrical socket is overloaded.
●
Replace the mains lead if you see signs of damage.
●
Do not allow consumers to keep things except for food.
●
Pharmaceutical, Chemical substances : These are not possible to be fine-
Controlled with a consumer fridge.
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of
explosion.
5