Pulsar dbi Profi-Bus PA Series Installation Manual

EU DECLARATION OF CONFORMITY
Declaration No. 001004
This declaration of conformity is issued under the sole responsibility of the
manufacturer.
We, the undersigned:
Name of manufacturer/
authorised representative: Pulsar Measurement
Address: Cardinal Building
Enigma Commercial Centre
Sandys Road
Malvern
Worcestershire
WR14 1JJ
Country: UK
Declare under our sole responsibility that the following apparatus:
Apparatus: Ultrasonic Transducers,
description: dBi Profibus PA series
Model or Type dBi 3, dBi 6, dBi 10 & dBi 15 Ex ia & FISCO
No.: Field device versions
Brand name: dBi Profibus PA series
Are in conformity with the following relevant EU legislation:
Directives Standards
Electricity Safety (LVD) 2014/35/EU EN61010-1: 2010
EMC: 2014/30/EU EN61326-1: 2013
ATEX general 2014/34/EU EN60079-0: 2012+A11 2013
ATEX (IS) EN60079-11: 2013
RoHS directive 2011/65/EU
I declare that the apparatus named above has been tested and
complies with the relevant sections of the above referenced
standards & directives
The following Notified Body has been involved in the conformity
assessment process:
Notified body: Element Materials Technology Rotterdam B.V.
Notified body No.: 2812
Role: Issue of ATEX EU Type Examination certificate.
Certificate No.: EMT18ATEX0014X
IEC EMT18.005X.
ATEX coding: II 1 G Ex ia IIC T4 Ga & II 1 D Ex ia IIIC T130°C Da
Tamb -40°C to +80°C & FISCO Field Device.
Name and position of person binding the manufacturer or authorised
representative:
Signed:
Name: Tim Brown
Function: Electronics Engineer
Location: Pulsar Process Measurement Ltd.
WR14 1JJ, UK.
Issue date: 23 rd November 2020.
MAINTENANCE & DISPOSAL
Check the cable & enclosure are intact; splits or cracks
render the equipment unsafe; remove it from service.
There are no user-serviceable parts.
Remove power before installation or decommissioning.
Dispose of transducer and cable in accordance with
regional environmental regulations for electronic equipment
e.g. WEEE regulations apply within the EU Directive
2012/19/EU
PULSAR MEASUREMENT CONTACT DETAILS
UK Office
Cardinal Building
Enigma Commercial Centre
Sandy's Road Tel: +44 (0)1684 891371
Malvern Fax: +44 (0)1684 575985
WR14 1JJ
United Kingdom
Website www.pulsarmeasurement.com
Canada Office
16456 Sixsmith Drive
Long Sault
ON Tel: 613-938-8956
K0C 1PO Toll Free: 855-300-9151
Canada
Website www.pulsarmeasurement.com
USA Office
11451 Belcher Road South
Largo Tel: 315-788+9500
FL 33773 Toll Free: 888-473-9546
USA
Website www.pulsarmeasurement.com
dBi PA series
Intelligent Transducer
INSTALLATION MANUAL
Full manual available @ www.pulsarmeasurement.com
M-DBiPA—000-001-4P