Serato RELOOP TERMINAL MIX 2 Quick Start Manual page 8

VERSION 1.1.1
# Reloop Terminal Mix
2 Control
20 CUP
21 CUE
22 PLAY/PAUSE
23 DECK
24 GAIN
25 EQ
26 FILTER
27 CUE CHANNEL
28 LOAD
29 CHANNEL FADER
30 MASTER
31 BOOTH
32 PHONES
33 CUE MIX
34 SAMPLER VOL
35 CRATES
36 VIEW
37 BACK
38 PREPARE
39 TRAX
40 VU METER
41 CROSSFADER
NOTE: #28 LOAD When used with SHIFT, activates Fader Start for each deck. This means the track will stop when the channel fader
is down, and the track will start when the channel fader is up. The LOAD button will flash when Fader Start is activated.
Serato DJ Function
Stutter Play
Temporary Cue
Play/Pause
Select Active Deck 1/3 (Left Deck) or 2/4 (Right Deck)
Adjust channel gain
Adjust Low/Mid/High
LP/HP filter combo adjust
Cue selected channel in headphones
Load track to selected deck
Adjusts channel volume
Adjusts master volume
Adjusts booth volume
Adjusts headphone volume
Adjusts between Cue and Master in your headphones
Adjusts the master volume of the sample player
Cycle REC/FX/SP-6 Panels
Cycle view modes
Toggles focus between library/crates/open panels
Loads track to prepare area
Scroll through currently focused area
LED representation of Master Output
Crossfades between the two channels
Shift Modification
When in Sync mode, used to disable the Pitch Fader
temporarily and change the zero position
Jump to start of track (more than 2 Sec elapsed) Previous
track (less than 2 sec elapsed)
Activate Fader Start
Cycle SP-6/FX/REC panels
Switch between 2 and 4 decks
Open Prepare Panel