Serato RELOOP TERMINAL MIX 2 Quick Start Manual page 3

VERSION 1.1.1
Looping
You have up to 8 loops per track in Serato DJ, and the choice between either
manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints)
showing on screen, or 8 loops. To switch between Manual and Auto looping, click
(Manual) or (Auto) onscreen. You can also halve or double the loop length in
either manual or auto modes. Press the 1/2X button to halve the loop length, hold
the 2X button to double the loop legnth, or you can use the Loop Length Knob to
do the same.
Reloop Terminal Mix 2 Control
1/2X + SHIFT
1/2X + SHIFT
2X + SHIFT
2X + SHIFT
LENGTH (Click Knob)
NOTE The best way to edit the in and out points of a manual loop is with the jog
wheel/platter on your Reloop Terminal Mix 2.
Reloop Terminal Mix 2
Control
LENGTH (Click Knob) Auto Loop On/Off
LENGTH (Twist Knob) Loop Length Select
MOVE Loop Shift left/right
(Twist Knob) or Reloop
(Click Knob)
NOTE You can also save a loop to the next available free loop slot in the software.
To do this, either click the button in the manual/auto loop tab or click
available loop slot. Your loops are saved to the file and recalled the next time it is
loaded. They are not lost if the file is moved or renamed.
Manual Loop mode
Set loop in point (Loop not active)
Adjust loop in point (Loop active)
Set loop out point (If loop in point is set)
Adjust loop out point (Loop active
Exit Loop (Loop Active)
Auto loop mode Shift
Loop Roll On/Off
Loop Roll Length Select
on an