Page 1
Cardio Spin Bike Key Code:42956945 WARNING! READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. FAILURE OF INCORRECT OR EXCESSIVE TRAINING MAY CAUSE INJURIES TO HEALTH.
Page 2
Safety Instruction and Precaution Please read this manual carefully before using this spin bike and make sure that you read the information supplied before commencing any exercise with this product. 1. Please consult a doctor before commencing any exercise with this equipment and if you develop any uncommon symptoms during use you should seek further medical advice.
Product Diagram Parts List Description Description Main Frame Ball pin Rear Stabilizer Screw knob Front Stabilizer Inner hex spanner Bottle Open spanner Seat adjustable post Wrench(in spare) Saddle Screw/Spacer/Cap nut(M8x35mm) Seat post Pedal(L/R) Front adjustable post Handlebar Monitor Technical Parameters Overall size 122x51x105cm Product total surface area...
Assembly Instruction 1. Put M8x35mm bolt (Part 15) on front stabilizer(Part 3), fingers hold the bolt bottom, put the front stabilizer in the front hole at the base of main frame (Part 1), add spacer and M8 cap nut (Part 15) in bolt, then tighten it with open spanner(Part 13).
4. Take out handlebar (Part 17), connect handle bar with front adjustable post together (Part 8) with hardware M8x12mm (Assembled in the hole) and fasten by inner hex spanner (part 13). Insert the post to the front tube of main frame, and adjust the handlebar to appropriate height, then fix the post to the tube of main frame with ball pin (Part 10) and fasten it with screw knob (Part 11).
2) Key Functions for MODE/RESET MODE: Press the red button to select SCAN or lock onto a particular function. RESET: Press the red button for 3 seconds to remove all the records except ODO. 3) Function Instruction SCAN: Automatic display the following functions in order, TIME-SPD-DST-CAL-ODO-PULSE. TIME: Press MODE key until the pointer advances to TIME.