Advertisement
Stage 2
Place the lens adaptor over the end of the lens,
making sure the red locking latch is facing the rear
of the lens. Slide and hold the red locking latch
outwards, to release the locking pin.
Stage 3
Whilst holding the red locking latch in an outward
position, twist the lens adaptor (clockwise) until
it fi ts on to the bayonet fi tting. Once in position,
release the red locking latch. The lens adaptor is
now secured on the lens and ready to use with the
SW150 Filter Holder.
To remove from the lens, slide and hold the
red locking latch outwards. Then twist the lens
adaptor (anticlockwise) until it becomes detached
from the bayonet fi tting.
www.leefi lters.com
Advertisement
