Advertisement
Quick Links
SW150 Lens Adaptor Assembly Instructions
FUJIFILM 8 16MM F2.8 XF LENS ADAPTOR
Stage 1
The Lens Adaptor is made up of three rings:
1. Front Ring (small lugs)
2. Compression Ring (split)
3. Locking Ring (largest threaded ring)
All three rings are supplied screwed together, unscrew from each other before
assembly. To fi x the Lens Adaptor the lens must be o the camera.
Stage 2
Slide the Compression Ring over the lens hood
and down the lens until it clicks in position and
can be pushed no further. Make sure the text on
the ring is facing the front of the lens.
1
2
3
Advertisement
Related Manuals for Lee Filters SW150
Summary of Contents for Lee Filters SW150
- Page 1 SW150 Lens Adaptor Assembly Instructions FUJIFILM 8 16MM F2.8 XF LENS ADAPTOR Stage 1 The Lens Adaptor is made up of three rings: 1. Front Ring (small lugs) 2. Compression Ring (split) 3. Locking Ring (largest threaded ring) All three rings are supplied screwed together, unscrew from each other before assembly.
- Page 2 Locking Ring is facing towards the rear of the lens. Stage 5 Screw the Locking Ring into the Front Ring in a clockwise direction until tight. The Adaptor is now fi xed in place and ready to use with the SW150 Filter Holder. www.leefi lters.com...