Installation - OK. OSF 400-M User Manual

INSTaLLaTION

1
Remove washer and
screw from the
extension pole.
4
Remove thumb screw
and axle from the upper
end of the extension
pole.
7
Reinstall the screws on
both sides of the motor
unit bracket.
9
Make sure appliance is disconnected.
1.
2.
2
Apply the weight to the
base and install the
extension pole with
washer and screw.
5
Remove the screws from
the motor unit bracket.
8
Install and tighten the
thumb screw to hold the
motor unit in place.
EN
1.
2.
3
Pull out the extension
pole and secure it by
tightening the thumb
screw.
6
Attach the motor unit to
the extension pole by
installing the axle.
9
Remove the 4 guard
screws from the motor
unit.