Mpeg-4 Connection Order - Axis 295 User Manual

AMC 21
For example, a specific IP address can be selected if the multicast stream sent from the network camera
or video server is not visible. Or, if you have more than one network interface, you can select which
network interface AMC will use to connect to the multicast stream sent from the Axis camera or video
server listed.

MPEG-4 connection order

AMC will use one of the protocols listed above depending on your network environment. It will try
each protocol in the order you specify and use the one that works best.
The default setting is shown in the figure above, but you can either deselect a protocol or change the
order AMC uses to select a protocol, by highlighting a protocol and clicking Move Up and Move Down.