Installing An Mpeg-4 Decoder - Axis 295 User Manual

12

Installing an MPEG-4 Decoder

On the live view page of your Axis camera, you can select to view live video over your network or over
the Internet, using either Motion JPEG or MPEG-4. If you select MPEG-4, you will be prompted to
install an MPEG-4 decoder.
Note: A system administrator may prevent users from installing and updating the MPEG-4 decoder. If you have a
problem installing the MPEG-4 decoder, please see you system administrator.
1. To start the installation, select the Click here to install or upgrade the MPEG-4 Decoder link in
the Live View page as shown in the figure below.
2. Read through the MPEG license agreement that appears, and if you agree to the conditions,
select I accept the License agreement and click OK.
AMC