Table of Contents
Advertisement
Introduction
Above all, we want to start by thanking you for choosing us. We hope that you will be happy with the
choice that you have made.
To get the best and longest performance from your MILL GRADER Mod. MTZ HI, please pay
careful attention to the instructions for operation and maintenance given in this manual.
Compliance with the instructions will prevent mishaps and accidents due to negligence or non-
compliance for which the R2 company hereby declines all liability.
This operation and maintenance manual should be considered an integral part of the implement, and
therefore it must always accompany it when it is sold, even when sold to a third party.
Keep this manual in a safe place and in good condition so that you or whoever uses the implement
can consult it without difficulty and in its entirety at all times.
This symbol is used in this
manual
to
indicate
(improper
use
implement),
behaviours and situations that
can put your safety or the safety
of other persons in danger.
For assembly, use and maintenance of the seeder (optional), refer to the related instruction manual.
The descriptions and illustrations in this manual, which do not include the implement with the
seeder, refer to both the standard implement (implement with roller unit, without seeder unit) and the
implement with the seeder unit attached.
1- Implement identification
Each R2 implement bears a plate with the CE mark indicating main identification data for R2 and the
implement (Fig. 1).The plate is located on the main casing of the implement (milling unit).
5
Description of the symbols used in this manual
Round symbols with white icons
actions
on a blue background in this
of
the
manual indicate the personal
elements,
protective equipment needed
while using the implement or
working on it.
Fig. 1
ENGLISH
This symbol is used herein to
indicate
that
the
operation must be
the tractor turned off and with
the key removed.
described
done with
5
Advertisement
Table of Contents
