Installation Steps; Package Contents; Installation Guide - Axis 212 PTZ Installation Manual

AXIS 212 PTZ Installation Guide
AXIS 212 PTZ Network Camera
This installation guide provides instructions for installing the AXIS 212 PTZ Network Camera
on your network. For all other aspects of using the product, please see the AXIS 212 PTZ User's
Manual, available from www.axis.com or on the Axis Network Video Product CD.

Installation steps

1. Check the package contents against the list below.
2. Install the hardware - page 4
3. Set the IP address - page 7
4. Set the password - page 13

Package contents

Item
Network Camera
Indoor power adapter
Note: The power adapter is country specific,
please check that the type of power adapter you
are using is correct
Extension cable
Terminal block connector
Mounting kit
Documentation
Warranty document

Installation Guide

Title/Variants
AXIS 212 PTZ
Europe
UK
Australia
USA/Japan
Argentina
Korea
1.8m (5.9 ft.) Power cable
4-pin I/O connector block
Screwdriver for tamper-proof screws
Tamper-proof screws (16mm)
Drill template
Angled wall mount - inc. screws (12mm)
Screws (38mm) and plugs for wall mount
AXIS 212 PTZ Installation Guide
Axis Network Video Product CD
Important!
This product must be installed in
compliance with local laws and
regulations.
Page 3