Page 1
AIR BEAD SEATER BLASTER TIRE WHEEL PUMP ITEM: 46021 / 46022 / 46023 / 46024 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
Page 4
DIAGRAM AND SPECIFICATIONS HANDLE FILL VALVE FUEL TANK NIPPLE & DISCHARGE PRESSURE VALVE GAUGE SAFETY RELEASE VALVE THREADED BARREL & LOCK NUT MOUNTING FEET TANK PRESSURE TABLE: Use the tank pressure table below as a guide for recommended starting pressures; individual circumstances may require higher or lower pressures. Increase pressure if the bead seating tool does not lift the tire bead far enough.
OPERATION USING THE BEAD SEATER FOR HORIZONTAL POSITION FOR TIRE/WHEEL: 1. Position the wheel and tire flat on a tire stand so that the lower side wall is slightly off the floor. 2. Be sure to seat the lower tire bead on the bottom flange of the wheel. 3.
Page 6
DIAGRAM AND SPECIFICATIONS OPERATING THE AIR RELEASE HANDLE Always turn the air release valve handle quickly and fully in one fluid motion during seating operation. LUBRICATE Lubricating all tire beads properly before using the bead seating tool is vital to proper functionality. Failing to lubricate beads may result in poor seating.
OPERATION AND MAINTENANCE DO NOT over inflate the tire. DO NOT inflate damaged tires. OTHER USES: DO NOT use the bead seater for any other purpose than what it is designed for. DO NOT store or transport a charged tank. DO NOT use it for dusting equipment nor people.
WARRANTY PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.