INSTALLATION & SERVICE INFORMATION (115 & 230 VOLTS AC)
DESCRIPTION
FLOJET 2 Gallon SS Water Booster System is designed
to provide a constant water pressure of up to 87 psi (6
bar) and a maximum flow rate of 1.5 gpm (5.7 lpm) at
10 psi (0.7 bar). The pump is fully automatic, with an
integral pressure switch and check-valve to maintain
system pressure and will supply a smooth water flow at
various requirement levels.
SPECIAL FEATURES
• Highest capacity for its size
•
Ultimate performance and reliability, with extended
service life
•
Over 100% increase in draw-down volume vs
competitive models
• Replaceable bladder
APPLICATIONS
Provides constant pressure water supply to:
• Carbonators;
• Ice makers;
• Pure water dispensing machines;
• Non-carbonated drink dispensing valves;
• Coffee/tea brewers;
• FCB/frozen drink machines;
• Moist-heat food holding cabinets
GENERAL SAFETY INFORMATION
Protect yourself and others by observing all safety
information. Shut off power and drain pressure from
system prior to service.
PERFORMANCE FOR AC MODELS
System Performance tested with 60 psi pre charge
and 30 psi city water pressure
95
90
85
80
75
70
65
60
55
50
45
1
6
11
16
21
8 oz
26
31
36
41
46
51
56
Time (sec.)
2 Gallon SS
Water Booster System
PUMP PERFORMANCE SPECIFICATIONS
Pump Design: Motor-operated 3 chamber diaphragm
Motor:
Wetted Parts:
Diaphragm
Check valve
Pump Housing
Accumulator Tank:
Housing
Bladder
System Weight:
SYSTEM PERFORMANCE SPECIFICATIONS
Max Amp Draw:
Liquid Temp:
Priming:
Max Flow:
Max Discharge Pressure:
2 oz
Max Inlet Pressure:
CERTIFICATIONS
Model
4 oz
02830000A
R
2830001A
*NSF Standard 18 Pump, Standard 61 Tank
6 oz
COMPONENT
Permanent magnet
Santoprene
304 stainless Steel
Butyl (food grade)
17.5 lb (7.9 kg)
115V AC
230V AC
Cycle
50/60 Hz
Min: 40° F (5° C)
Max: 120° F (49° C)
Dry
6 feet (1.9 m)
Wet
10 feet (3.1m)
1.5 GPM (5.7 LPM)
87 psi (6 bar)
30 psi (2.1 bar)
Voltage
Certification
115 VAC
230 VAC
TM
EPDM
Nylon
0.9 amp
0.5 amp
NSF
NSF