Finishing; Wood Ember Installation; Optional Grape Vine And Driftwood Log Installation - Napoleon NEFLC32H-EU Installation And Operation Manual

4.0 fi nishing
EN
! WARNING
• Power supply service must be completed prior to fi nishing in order to avoid reconstruction.
• Heat vents and air openings cannot be covered under any circumstances.
4.1

wood ember installation

1. Carefully place the wood embers onto the bottom media tray (Fig. 1).
2. Apply an even layer from side to side.
4.2

optional grape vine and driftwood log installation

1. Carefully place grape vine and driftwood logs on the media tray as shown (Fig. 2).
2. Use the wood embers (see "wood ember installation" section) to fi ll in the spaces between the logs. This will
improve the overall look of the appliance.
18
W415-2789 / A / 06.01.20
Fig. 1
Fig. 2 (Recommended placement)