Chapter 5. Maintaining the T17 Transducers
5.2 Using the Insertion Mechanism (cont.)
3. On the insertion mechanism, remove the bolts that fasten the barrel flange to the packing gland flange (see
Figure 89 below).
4. Retract the barrel from the packing gland until the transducer head is recessed in the packing gland 9see
Figure 90 below). The stop ring will "click" when the transducer is fully recessed.
76
Bolts
Figure 89: Removing the Bolts
Packing Gland
Figure 90: Retracting the Barrel
Model T17 Installation Guide