Table of Contents
Advertisement
8
Disposal, recycling of used
equipment
In your own interest and in the interest of the environ-
ment, please ensure that all components of the equip-
ment are only disposed of in the designated and appro-
ved ways
8.1 Decommission
Disused equipment must be taken out of service imme-
diately in order to avoid later misuse and endangering
the environment or people.
Step 1: Remove all environmentally hazardous fluids
from the old devices.
Step 2: If necessary, dismantle the devices into mana-
geable and usable components and
components.
Step 3: The device components and operating materials
must be routed to the appropriate disposal
routes.
8.2 Disposal of electrical equipment
Please note that electrical equipment contains a variety
of recyclable materials and environmentally harmful
components. Contribute to the separation and proper
disposal of these components.
In case of doubt, please contact your municipal waste
disposal. If necessary, the help of a specialist disposal
company should be consulted for processing.
9
Spare parts
DANGER!
Risk of injury due to use of incorrect spare
parts!
The use of incorrect or faulty replacement parts may
cause danger to the operator and cause damage
and malfunction.
- Only use original spare parts from the manufacturer
or replacement parts approved by the manufactu-
rer.
- In case of doubt, always contact the manufacturer.
Tips and recommendations
If non-approved spare parts are used, the manu-
facturer's warranty expires.
MV-Series | Version 1.08
Disposal, recycling of used equipment
9.1 Spare parts order
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
Specify the following key data for inquiries or ordering
spare parts:
- device type
- item number
- Position number
- Construction year
- amount
- desired shipping method (post, freight, sea, air,
express)
- delivery address
Spare parts orders without above given information can
not be considered. If the shipping method is missing,
shipping will be at the discretion of the supplier. Infor-
mation on the device type, article number and year of
manufacture can be found on the type plate, which is at-
tached to the device.
Example
The protective grid for the mobile fan MV 30 must be or-
dered. The protective grid is identified in the spare parts
drawing with the number 2.
When ordering spare parts, send a copy of spare parts
drawing with marked protective grid component and
marked position number 2 to the authorised dealer or to
the spare parts department and provide the following in-
formation:
- Type of device:
Mobile Fan MV 30
- Item number:
6260030
- Position number: 2
The article number of your device:
Mobile Fan MV 30: 6260030
Mobile Fan MV 50: 6260050
Mobile Fan MV 60: 6260060
7
Advertisement
Table of Contents
