Table of Contents
Advertisement
Intended Use
CAUTION!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to minor or light injuries if they are not avoided
ATTENTION!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to property and environmental damages if they
are not avoided.
NOTE!
This combination of symbol and signal words
indicates a possibly dangerous situation which may
lead to property and environmental damages if they
are not avoided.
Tips and recommendation
Tips and recommendation
This symbol highlights useful tips and
recommendation as well as information for all
efficient and trouble-free operation.
It is necessary to observe the safety notes written in
these operating instructions in order to reduce the risk of
personal injuries and damages to property.
2.2 Personal protective equipment
The personal protective equipment serves to protect
persons against impairments of safety and health while
working. The staff member has to wear personal
protective equipment while performing different tasks
on and with the machine which are indicated in the
individual paragraphs of these instructions.
The personal protective equipment is explained in the
following paragraph:
Head protection
The industrial helmet protects the head against
falling objects and bumping against fixed objects.
Protective gloves
The protective gloves are used to protect the hands
from sharp-edged components, as well as from
friction, abrasions or deeper injuries.
4
Safety boots
The safety shoes protect the feet against bruising,
falling parts and slipping on slippery surfaces.
Protective clothing
Protective clothing is tight-fitting work clothing, with
no protruding parts, with low tear resistance.
2.3 Safety labels on the mobile fan
The following safety markings are attached to the mobile
fan (Fig. 1), which must be observed and followed:
2
1
4
3
5
Fig. 1: Safety labels: 1 Warning of dangers |
2 Warning of dangerous electrical voltage |
3 Warning of rotating machine parts |
4 Grounding symbol | 5 Flow direction | 6 Safety instructions
The safety symbols attached to the machine must not be
removed. Damaged or missing safety symbols can lead
to incorrect actions, personal injury and damage to pro-
perty. They must be replaced immediately.
If the safety symbols are not recognisable and compre-
hensible at first glance, the Mobile Fan must be taken
out of operation until new safety symbols have been ap-
plied.
3
Intended Use
The fan is used exclusively for extracting and distribu-
ting air, for smoking and drying rooms, as well as for
cooling and drying objects. It is not explosion-proof and
is not intended for outdoor use.
The fan may be operated only by instructed persons.
Proper use also includes compliance with all information
in this manual. Any use beyond the intended use or
otherwise is considered misuse.
For structural and technical changes to the mobile fan,
the company Stuermer Maschinen GmbH assumes no
liability.
Claims of any kind due to damage due to improper use
are excluded.
6
MV-Series | Version 1.08
Advertisement
Table of Contents
