Protection Against Magnetic And Electromagnetic Fields During Operation And Assembly; Protection Against Accidental Contact With Hot Parts - Bosch Rexroth EC302 Installation Instructions Manual

48/72 Bosch Rexroth AG
2.6.5 Protection against magnetic
and electromagnetic fields
during operation and
assembly
DANGER
Health risk for persons with pace-
makers, metal implants, and hearing
aids in the immediate vicinity of
electrical equipment!
Magnetic and electromagnetic fields may
interfere with and impair the function of
pacemakers or hearing aids as well as
that of metal implants. This may lead to a
health risk for the persons concerned.

Persons with pacemakers and metal
implants are prohibited from entering
areas in which electrical devices and
parts are assembled, operated, or
commissioned or in which motor
parts with permanent magnets are
stored, repaired, or assembled.

If persons with pacemakers need to
enter these types of areas, a physi-
cian must first be consulted. The in-
terference resistance of current or fu-
ture pacemaker versions varies
greatly. For this reason, no generally
applicable rules exist.

Persons with metal implants, metal
shrapnel in the body, or hearing aids
must consult a physician before ente-
ring these types of areas, as adverse
health effects must be expected in
these areas.
EC30X | 3 609 929 728/2014-01
2.6.6 Protection against accidental
contact with hot parts
CAUTION
Hot surfaces possible on motor
housings and gearboxes!
Risk of injury! Risk of burns!

Do not touch device housing surfa-
ces at heat sources! Risk of burns!

Do not touch housing surfaces of
motors and gearboxes! Risk of burns!

Depending on the operating condi-
tions, temperatures during or after
operation may exceed 60 °C
(140 °F).

After switching off the motors, allow
them to cool down sufficiently before
accessing them.

Wear protective gloves or do not
work near hot surfaces.

For specific applications, the manu-
facturer must undertake measures on
the end product, the machine, or the
system to prevent burn injuries du-
ring the end use. These measures
must be in accordance with the saf-
ety regulations. Examples of possible
measures are: safety warnings, a se-
parating safety device (shielding or
locking), and technical documenta-
tion.