Designations; Abbreviations; Safety Instructions; About This Chapter - Bosch Rexroth EC302 Installation Instructions Manual

42/72 Bosch Rexroth AG

1.3.3 Designations

This documentation uses the following desi-
gnations:
Tab. 4: Designations
Designation Meaning
BS Operating program of the
tightening system (e.g.
BS300/BS350)
CS351 S... Compact system of the
tightening system 350 for
the connection of tigh-
tening spindles

1.3.4 Abbreviations

This documentation uses the following abb-
reviations:
Tab. 5: Abbreviations
Abbreviation Meaning
DIN Deutsches Institut für
Normung (German Stan-
dards Institution)
EMC Electromagnetic
Compatibility
EN Europäische Norm (Euro-
pean standard)
ISO International Organization
for Standardization
NEC National Electric Code
NEMA National Electrical Manu-
facturers Association
PELV Protective Extra Low Vol-
tage
EC30X | 3 609 929 728/2014-01
2

Safety Instructions

This chapter describes the general safety
requirements and important information on
the safe assembly of the product.
2.1

About this chapter

The product has been manufactured accor-
ding to the accepted rules of current tech-
nology. There is, however, still a danger of
personal injury or damage to equipment if
this chapter and the safety instructions in
this documentation are not complied with.

Read this documentation completely
and thoroughly before working with the
product.

Keep this documentation in a location
where it is accessible to all users at all
times.

Always include the required documen-
tation when you pass the product on to
third parties.
2.2

Intended use

The product described in this documenta-
tion is exclusively intended for installation in
Rexroth tightening spindles in connection
with control and power electronics for
Rexroth tightening systems and the related
connecting cables.
The product is intended for industrial use
and not for private use.
Observe the operating conditions and per-
formance limits specified in the technical
data.
Intended use includes having read and un-
derstood this documentation and especially
the chapter "Safety instructions".