Operating Instructions - Frigidaire EFR176-C-RED-COM Use & Care Manual

6

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to
avoid damage to the internal components.
1. Remove the screw securing the hinge cover and
remove the hinge cover. Remove the two screws
securing the upper hinge and remove the upper
hinge. Remove the hinge hole covers from the top
left side of the cabinet.Remove the door from the
cabinet. See figure A.
2. Remove the hinge hole cover from the top left
side of the door and place it in the hinge hole on
the top right side of the door. See figure B.
Remove the solid foot from the bottom left side
3.
of the cabinet and remove the adjustable foot and
lower hinge from the bottom right side of the
cabinet. Install the lower hinge and adjustable foot
on the bottom left side of the cabinet and install
the solid foot on the bottom right side of the
C. See figure C.
Place the door on the cabinet and install the upper
4.
hinge on the top left side of the cabinet. Before
tightening the screws in the upper hinge,ensure
that the top of the door is level with the top of the
cabinet and that the rubber gasket is making a
good seal with the cabinet all the way around.
Install the hinge cover over the hinge and install
the hinge hole covers in the screw holes on the
top right side of the cabinet. See figure D.