Signal - Bosch WTG86403UC Use And Care Manual / Installation Instructions

Signal

For switching the buzzer on and off touch the Signal
button.
The buzzer indicates program end if it is activated.
Other alarms are not influenced by this option.
You can also change the following settings:
volume for buzzer
▯
volume for button signals
▯
To change these settings always activate adjustment
mode first.
Activate adjustment mode
Select Cotton Extra Dry on position 1.
1.
The appliance is on.
Hold down Start/Pause and turn the program selector
2.
to the right (position 3). Release Start/Pause button.
Adjustment mode is now activated and the default
volume for buzzer appears in the display.
Changing the volume
You can set the volume by touching the Time dry
(volume down) or Finish in (volume up) button with the
program selector in the following positions:
Position 3 for buzzer volume
▯
Position 4 for button signals volume
▯
Quit adjustment mode
Turn the program selector to Off position. The settings
were saved.
26
0 = off, 1 = soft, 2 =
mid, 3 = loud, 4 =
very loud
0 = off, 1 = soft, 2 =
mid, 3 = loud, 4 =
very loud