Table of Contents
Advertisement
5. TROUBLESHOOTING
Problem
AutoLight Plus will not turn on
Sample glass not reading
74% ± 3%
Light globe not working
AutoLight Plus turns off during use
For other problems, contact AutoTest Products. Repairs should only be carried out by
AutoTest Products Pty Ltd or by an Authorised Service Centre in order to ensure the
product retains its calibration.
6. CALIBRATION
AutoLight Plus MAGNETIC will require calibration at intervals of two years (one year for
UK) or as required by your local Authority. Calibration can only be carried out by AutoTest
Products Pty Ltd or by an Authorised Service Centre.
7. AutoLight Plus Download version 3.00 Quick Start Guide
System Requirements:
• Windows 10 or later
Install AutoLight Plus Download Software
AutoLight Plus
Insert the
Follow on screen instructions.
You are now ready to download readings from your
Pairing Device
(1)
Switch ON your
it indicates that the device is ready and can be discovered using a Bluetooth discovery tool.
AutoLight MAGNETIC User Manual Version 1
41%, 51% or
S o f t w a r e S e t u p
Download software from enclosed USB stick and run "Setup.exe".
AutoLight Plus
device. When the light meter displays "
Troubleshooting
Batteries are discharged, replace batteries
Adjust using test sample
Return AutoLight Plus MAGNETIC for servicing
Batteries have discharged, replace batteries
AutoLight Plus
light meter.
.
" on its LED screen,
Page 7
Advertisement
Table of Contents
