Ready For Operation; Overview Of Controls And Indicators - Viessmann Vitotronic 100, GC1 Operating Instructions And User's Information Manual

Ready for operation

Overview of controls and indicators

Factory settings
Press this button to reset all altered
values to their factory settings. Please
note that all altered values are reset to
the factory settings.
Flashing data
Data flashing in the display window
means that new settings can be
entered.
6
TÜV
Other display symbols
(These are not displayed continuously,
but appear according to system type
and operating status)
8
Digital display of the
corresponding value
Unit of measurement for
°C
temperature values
Unit of measurement for display
h
of burner hours run
U Fault message
r
Central heating ON
rp Displayed when output sÖ is
activated
Vitotronic 100, GC1
Manual override
Changing the boiler water temperature
(without function in multi-boiler system)
Changing the domestic hot water
temperature (without function in multi-
boiler system) (see pg.21)
Value selector buttons
Information
Confirmation button
Factory settings (see below)
Display window
Heating program selector buttons
w without function in multi-boiler
system (see pg. 10)
Adjustable high limit
Manual reset fixed high limit
Power on/off switch (see pg. 14)
Fuse F1, F2
TÜV (for service purposes only)
Operating status indicator (green)
Fault indicator (red)
A Burner ON
w Domestic hot water heating
released
wp DHW pump (circulation pump
for heating the DHW tank) ON
Scan hours run
|
1st stage burner
Scan hours run
||
2nd stage burner
Scan number of burner starts
|||
Consumption
||||