Setting The Party Mode - Viessmann Vitotronic 100, GC1 Operating Instructions And User's Information Manual

Ready for operation

Setting the party mode

Party mode
12
Switch on the party mode when you require central heating and domestic hot
water (if a DHW tank is installed) for a short time independently of the preset
heating and time program.
To activate the party mode
1. Open the hinged cover on the
programming unit.
2. Press the heating circuit selector
button; the button is illuminated.
Press
3.
illuminated, the party mode
ºC
display appears in the display
window and the party tem-
perature value flashes.
4. To change the party temperature:
/ Press the
the required temperature
value appears.
Confirm by pressing
5.
temperature value stops
flashing and is stored.
The display changes and
shows the boiler
temperature.
6. Close the hinged cover on the
programming unit.
To cancel the party mode
The party mode is cancelled the next
time the preset heating program
switches automatically to central
heating with the "normal room
temperature".
If you want to cancel the party mode
immediately, press the heating circuit
selector button and the
again; the button is no longer
illuminated.
; the button is
/ button until
; the
button
Vitocontrol-S, VD2/CT3/CM2
The light on the button turns off
after approx. 1 minute. The party
mode is still active.