Sony STR-DH590 Service Manual page 26

STR-DH590
SPECIAL MODE
The various device information and software version, etc. can be displayed
Procedure:
1. Press the [ ] button to turn the power on.
1
2. While pressing the [DISPLAY] button, press the [2CH/MULTI], [MOVIE], [MUSIC] button in order, the message "SPCIALZE" ap-
pears.
3. Press the [V]/[v] buttons on the remote commander, the message "SPECIAL>" is appears.
Note: If "SPECIAL>" is not displayed, press the [AMP MENU] button on the remote commander will display it.
4. Press the [ ] button on the remote commander, the special menu list ("MODEL") is appears.
5. Each time the [V]/[v] buttons on the remote commander is pressed, the item is switched in the order of the following table.
Releasing method:
While pressing the [DISPLAY] button, press the [2CH/MULTI], [MOVIE], [MUSIC] button in order again, the message "OFF" appears,
and this mode can be released.
Items
Model setting
Destination setting
Model & Destination check
System version
Main version
OSD version
DSP Sfl ash1 VER
Bluetooth module version
Bluetooth hardware version
DSP debug mode
USB Update
Line check for update
HDCP key read
RS232C select
26
While pressing [DISPLAY]
[2CH/MULTI] press
[MOVIE] press
[MUSIC] press
Display
M O D E L
D E S T.
M D L + D E S T.
S Y S V X. X X X X.XXX : System software version
M A I N X. X X X X.XXX : Main system controller (IFcon) software version
O S D X. X X X.XX : OSD software version
S F L A X. X X X.XX : DSP1 serial fl ash software version
B T M X. X X X.XX : Bluetooth software version
B T H X X XX : Bluetooth hardware version
D S P. D E B U G Not used for the servicing
U S B U P D
L C U P D
H D C P K E Y Not used for the servicing
2 3 2 C S E L Not used for the servicing
Remark
When [b] button on the remote commander is pressed, the following
message is appears.
H59 FIX : STR-DH590
(When [B] button on the remote commander is pressed, return to the
special menu list)
When [b] button on the remote commander is pressed, the following
message is appears.
UCA FIX : US and CND models
AU FIX : AUS model
(When [B] button on the remote commander is pressed, return to the
special menu list)
When [b] button on the remote commander is pressed, the following
message is appears.
H59 UCA : STR-DH590: US and CND models
N59 AU : STR-DH590: AUS model
(When [B] button on the remote commander is pressed, return to the
special menu list)
This item is guided by technical news, when update occurs.
Not used for the servicing
– Continued on next page –