IKA R 2850 Operating Instructions Manual page 9

• Install the stand on a flat, stable, clean, non-slip, dry and
fire-resistant surface.
• Prior to each use, always check the stand, stirrer/dis-
perser and accessories for damage. Never use damaged
parts.
WARNING
WARNING
• You must also follow the safety instructions contained in
the operating instructions for the stirrer or disperser.
WARNING
- the upper and lower end stops should always be tight
- the container should always be held tightly in place
using the clamping device
- the lockable castors on the stand must be fixed in
place before start-up.
• Unpacking:
- Please unpack the device carefully
- In the case of any damage a detailed report must be
sent immediately (post, rail or forwarder).
• Transport:
Once unpacked, the castors can be used to move the
stand to its final position.
• Use:
The R 2850 floor stand should only be used to hold,
raise and lower stirrers and dispersers. The castors must
be locked when the device is in use.
The castors must be locked when the device is in use
and the container must be held in place using the clips.
• Field of application:
- Laboratories
Check the mounting position of
the stirrer/disperser to avoid the
danger of the unit tipping over.
Observe the maximum permis-
sible load-bearing capacity (see
"Technical data").
Check that the stirrer/disperser
is installed correctly before use
and at regular intervals:
Unpacking and transport
Intended Use
- Manufacturing plants
• Because the options for combining products, tools, stir-
ring vessel, trial set-up and medium are nearly endless,
user safety cannot be ensured simply with design re-
quirements on the part of the product. For this reason,
it may become necessary for users to take other precau-
tionary safety measures. For example, glass apparatus
or other stirring vessels that are sensitive to mechanical
stress can be damaged or shattered by an imbalance,
increasing the speed too quickly or too little distance
between the stirring tool and the stirring vessel. Users
can sustain serious injury from glass breakage or from
the freely-rotating stirrer tool.
DANGER
- your fingers do not get caught in the adjusting slot
- nothing becomes caught between the bracket and
devices or other objects attached to the bracket, e.g.
the lower end stop or lip of the container.
• When moving the stand, ensure the stirrer/disperser is at
the lower end stop position.
WARNING
• Scope of delivery:
- IKA R 2850 Floor stand
- Tension belt and clip
- Allen key
- Operating instructions.
The safety of the user cannot be ensured:
- if the stand is used in conjunctions with accessories not
made or recommended by the manufacturer
- if the stand is not used for the intended purpose as spec-
ified by the manufacturer.
The stand should only be used if it is in perfect working
condition. The correct functioning of the stand must be
checked at regular intervals.
Serious danger of crushing!
When adjusting the height of
the bracket, ensure:
When setting up the stand, ensure
that the feet of the unit cannot re-
sult in someone tripping over.
9