Health O Meter 500HB Installation Instructions Manual page 5

9. Place the drill guide onto the bottom of the scale
platform as shown. Position drill guide so that the
arrow on the guide points to center of the scale.
Align edge of drill guide with edge of platform.
10. There are posts on both sides of the drill guide.
These posts must slide into holes in platform.
11. Drill guide must be positioned so that posts slide
fully into holes on bottom of scale platform.
12. With drill guide properly positioned on bottom of
scale platform, use a power drill and the provided
¼" drill bit to drill 4 holes through the bottom of
the scale platform.
P/N 82-00009 REV A 500HB Installation Instructions REV20200402_web
Align edge of drill
guide with edge of
scale platform
5