Download Print this page

Problem Solving - Wahl 1230 Operating Manual

Hide thumbs Also See for 1230:

Advertisement

E N G L I S H

Problem solving

Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set. If this does not resolve the prob-
lem, replace the blade set.
Skin injury
Cause: Too much pressure on the skin.
de
f Reduce pressure when cutting close to skin.
en
Cause: Cutting angle is too steep.
f Hold appliance flatter to the skin.
es
Cause: Damaged blade set.
nl
f Check whether the blade edges were damaged during use and
replace the blade set if necessary.
hu
Cause: Gap between the front edge of the bottom blade and the
front edge of the top blade is not correctly aligned.
f Align the bottom blade.
Appliance is not working.
Cause: Defective power supply.
f Make sure that contact between the appliance plug and the
socket is faultless.
f Check the mains cable for possible damage.
In the event that this information does not help you resolve your
problem, please contact our service centre. Never attempt to repair
the appliance yourself!
14
Disposal
Caution! Environmental damage in the case of incor-
rect disposal.
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impacts on
people and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electrical and electronic appli-
ances in the European Union:
Within the European Union, national regulations are
specified for the disposal of electrical appliances based
on EU Waste Electrical and Electronic Equipment Direc-
tive 2012/19/EU (WEEE). In accordance with this, the
appliance can no longer be disposed of with the local
or domestic waste. The appliance will be accepted free
of charge by local collection points or recycling centres.
The packaging for this product is made from recyclable
materials. Dispose of this in an environmentally friendly
manner by recycling it.

Advertisement

loading