Advertisement
E N G L I S H
General user information
Information about using the operating manual
f Before using the appliance for the first time, you must read and
understand the operating manual completely.
f Consider the operating manual as part of the product and store
it in a safe and accessible place.
f This operating manual is also available in PDF format from
our service centres. The EC declaration of conformity can also
de
be requested in other official EU languages from our service
centres.
en
f Include this operating manual if passing the appliance on to
a third party.
es
Explanation of symbols and notes
nl
The following symbols and signal words are used in this operating
manual, on the appliance or on the packaging.
hu
DANGER
Danger of electric shock which may result in serious
physical injury or death.
DANGER
Danger of explosion which may result in serious physical
injury or death.
DANGER
Danger due to the use of flammable materials. Danger
of fire development which may result in serious physical
injury or death.
WARNING
Warning of possible physical injury or a health risk.
CAUTION
Information about danger of material damage.
Note with useful information and tips.
Action to be taken by owner.
f
Carry out these actions in the sequence described.
1.
2.
3.
12
Product description
Description of parts (Fig. 1)
A Blade set
B Locking switch for cutting length adjustment
C Cutting length adjustment lever
D On/off switch
E Hang-up loop
F Mains cable
G Blade guard
H Oil for blade set
I
Cleaning brush
Not shown: Attachment combs (depending on model)
Technical data
Drive:
Quiet oscillating armature motor
Operating voltage:
220 – 240 VAC / 50/60 Hz
110 – 120 VAC / 50/60 Hz
depending on country-specific
designs, see nameplate on
appliance
Power consumption:
15 W
Dimensions (L x W x H):
180 x 67 x 42 mm
Weight:
435 g without mains cable
Emission sound
pressure level:
max. 60 dB(A) @ 25 cm
Vibration:
< 2.5 m/s
Operating conditions
Ambient temperature:
0°C - +40°C
The appliance is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Directive
2014/30/EU and Machinery Directive 2006/42/EC.
Operation
Preparation
Keep the packaging material for safe storage or trans-
port later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage stated
on the nameplate.
Mains operation
1. Insert the appliance plug into the mains socket.
2. Switch on the appliance using the on/off switch (Fig. 2ⓐ) and,
after use, switch it off again (Fig. 2ⓑ).
2
Advertisement
