Troubleshooting - HART HLST02LB Operator's Manual

MAINTENANCE
STORING THE ATTACHMENT
 Store the attachment in a well-ventilated place that is
inaccessible to children.
 Keep away from corrosive agents such as garden chem-
icals and deicing salts.

TROUBLESHOOTING

PROBLEM
Line will not advance
Grass wraps around boom
housing and string head
POSSIBLE CAUSE
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Cutting tall grass at ground level.
8 – English
REPLACEMENT PARTS
0.080 in. Twisted Replacement
Line (Pre-cut) ................................................HAC180PCFL
Lubricate with silicone spray.
Install more line. Refer to Line Replace-
ment earlier in this manual.
Pull lines while alternately pressing down
on and releasing bump knob.
Remove line from spool and rewind.
Refer to Line Replacement earlier in
this manual.
Cut tall grass from the top down to pre-
vent wrapping.
SOLUTION