Kapego XS PRO User Manual page 26

3.3.2. Fixed preinstalled programs
Here you can see a list of the preinstalled programs on the controller. Behind the program name you
can see if you can use Hold or Fade function or both.
Attention: If you change one of the two settings while the program is running, then the stripe will be
shut down shortly and the program restarts. That's that you can see how many steps you went on in
the described functions. . If you don't know in which program you are, please push the Program left
button as long as nothing changes anymore. Then you are in program 1.
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Fade In Fade Out
This program fades in and fades out the warmwhite and coldwhite one after
an other. In this case fade speed changes the proportional part of the fade
time and the hold time adjusts the holding time of the color before it starts to
fade again.
Ramp Up
This program fades the color to full on and shuts it down immediately. After
that the next color will be faded in and so on. In this case fade speed changes
the proportional part of the fade time and the hold time adjusts the holding
time of the color before it starts to fade again.
Ramp Down
This program works exact the other way round like the Ramp up. That means
it dims the colour to off and lights up immediately. In this case fade speed
changes the proportional part of the fade time and the hold time adjusts the
holding time of the color before it starts to fade again.
3 Color Flash
3 colour flash effect. In this case you can adjust the hertz rate of the flashes
by using Fade Speed. (1,2,5,10 Hz)
Random
This program creates a random effect in recalling different brightness levels
of the two colors.
Strobe 3 Color
This is a strobe program with 3 colors WW CW and Full on, in can be
adjusted in speed by using fade speed (1,2,5,10Hz)
X S P R O W H I T E C O N T R O L
„FADE SPEED" "HOLD TIME"
„FADE SPEED" "HOLD TIME"
„FADE SPEED" "HOLD TIME"
„FADE SPEED"
„FADE SPEED"
11 / 14