Advertisement
DIMENSIONAL DRAWINGS
inch (mm)
8.35 (212.0)
MANOMETER
MM 200600
FILL
=0.786
50
0 Pa
INSTALLATION
1) Mount the device horizontally in the desired location.
Figure 1 - Surface mounting
MANOMETER
MM 200600
FILL
=0.786
0 Pa
2) Unscrew the zero adjustment knob (lower one) so that it is com-
pletely open and then turn one round backwards. Open the fill plug
(upper one) and pour in the gauge fluid until it reaches the zero on
the scale. Finetune with the zero adjustment knob until the fluid is
exactly at the zero level. Screw the fill plug back to its place.
3) Connect the pressure tubes. Connect positive pressure to port
labeled "+" and negative pressure to port "-".
NOTE! Only use gauge fluid approved by HK Instruments to guaran-
tee accuracy and functionality of the device.
Copyright HK Instruments, Inc. 2017
4.13 (105.0)
Pa
600
500
400
300
200
150
100
Pa
600
500
400
300
200
150
100
50
www.hkinstrumentsinc.com
RECYCLING/DISPOSAL
The parts left over from installation should be recycled according
to your local instructions. Decommissioned devices should be
disposed of as mixed waste according to your local instructions.
WARRANTY POLICY
HK Instruments, Inc. (HK)
(a) WARRANTY COVERAGE: HK warrants to the original end user of the Products that
the Products will, at the date of initial purchase, meet the applicable specification for
such Products (as described by HK in its product literature) and, under normal use and
service, will be free from any defects in materials or manufacture for (a) one (1) year
from date of sale to end user for electromechanical Products and (b) five (5) years from
date of manufacture for electronic Products.
(b) NO WARRANTY OF PRODUCT SUITABILITY: Neither HK nor the manufacturer of
the Products to be sold hereunder ("Manufacturer") makes any warranty that Products
are suitable for a particular purpose, application or design. Many states and localities
have differing codes or regulations governing the installation and/or use of HK
products. HK does not guarantee compliance with such codes or regulations; the end
user is solely responsible for safe and correct installation and use of the Products and
for compliance with such codes and regulations.
(c) EXCLUSION OF IMPLIED WARRANTIES: THE WARRANTY HEREIN IS THE
ONLY WARRANTY APPLICABLE TO THE PRODUCTS AND EXCLUDES ALL OTHER
WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTY ARISING FROM
COURSE OF DEALING OR USAGE OF TRADE.
(d) REMEDIES FOR NON-CONFORMITY OR BREACH OF WARRANTY: If the Product
purchased does not conform to the applicable warranty, HK will provide, at its
option, one of the following remedies: (1) repair of the non-conforming Product, (2)
replacement with a conforming Product, or (3) refund of the original purchase price.
THESE REMEDIES SHALL BE THE EXCLUSIVE AND SOLE REMEDY for any breach
of warranty. HK and Manufacturer have no other responsibility or liability for breach of
warranty or otherwise.
(e) LIMITATION OF LIABILITY: NEITHER HK NOR MANUFACTURER WILL BE LIABLE
FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
UNDER ANY CIRCUMSTANCE, INCLUDING WITHOUT LIMITATION ANY DEFECT IN
THE PRODUCT PURCHASED.
(f) FURTHER LIMITATIONS: The warranty herein does not cover damage caused
by lightning, flood or other natural phenomenon; normal wear and tear; accident,
improper or careless handling, abnormal use, overloading, improper storage or abuse;
incorrect installation, care or reconstruction; or alteration, calibration, reconfiguration,
maintenance or installation work done by unqualified personnel. Should Manufacturer
alter the structure of any Product in the future, HK and Manufacturer shall not be
obligated to make comparable changes to Products already purchased. HK will give
a new warranty for Products being replaced or repaired within the warranty period,
however only to the expiration of the original Product's warranty period. The warranty
includes the repair of a defective part or device, or if needed, a new part or device, but
no other costs except as otherwise stated in the HK Distributor Terms and Conditions.
Installation version 2.0 2017
Advertisement
