Hearth & Home IFT-RC150 IntelliFire User Manual

IFT-RC150 IntelliFire Touch Wireless Wall Switch

Introduction

The IFT-RC150 is a wall-mounted wireless wall switch
that is designed to operate Hearth & Home Technologies
appliances equipped
Technology. It has a temperature sensor and can be
used to control the ON/OFF and cold-climate func-
tion of your appliance as a stand-alone or in combi-
nation with a Mobile App. This user manual serves
as a quick reference to the wall switch operation.

Operation

Pairing

• The IFT-RC150 must be paired to control the Elec-
tronic Control Module (ECM). The pairing button is
located underneath the top housing cover.
• Remove IFT-RC150 top housing cover. Install 2
AA alkaline batteries.
• The pairing button will activate the pairing mode of the
wireless wall switch for 15 seconds while the LED
indicator blinks once every second.
• To pair the IFT-RC150 with the IFT ECM, press the
pairing button on the ECM. When the ECM green
LED starts blinking, press the pairing button on the
IFT-RC150. If pairing is successful, the ECM will
respond with a double beep and the green LED will
stop blinking. Re-install the IFT-RC150 top housing
cover.
LED LED
FIRMWARE FIRMWARE
PROGRAMMING PROGRAMMING
ACCESS ACCESS
PAIRING PAIRING
BUTTON HOLE BUTTON HOLE

COLD CLIMATE

COLD CLIMATE
CONTROL BUTTON CONTROL BUTTON
Figure 1. IFT-RC150 No Top Cover
IFT-RC150
Model: 2564-100
with the IntelliFire Touch
AA AA
BATTERY BATTERY
HOLDER HOLDER
ON/OFF ON/OFF
SWITCH SWITCH
Hearth & Home Technologies • IFT-RC150U User Manual • 2564-981 • 11/20
User Manual

Flame ON/OFF

• To turn the flame ON, press the top of the momentary
toggle switch.
®
• To turn the flame OFF, press the bottom of the
momentary toggle switch.
The appliance has a safety feature that automatically
shuts down the appliance after 9 hours of continuous
operation.
Cold Climate
This function turns on a continuous pilot and keeps the air
inside the appliance warm while not in use. It is a useful
feature in cold weather to minimize condensation on the
appliance glass.
• To turn the cold climate mode ON/OFF, press the small
momentary push button below the momentary toggle
switch.
Note: This feature is disabled when a Power Vent is
installed on the appliance.
Note: The continuous pilot will automatically turn OFF
after 166 hours if appliance is not actively used.
If Flame ON is activated before 166 hours, the
automatic timer will re-start.
RED/GREEN LED RED/GREEN LED
Figure 1. IFT-RC150 Functions
COLD CLIMATE ON/OFF COLD CLIMATE ON/OFF
FLAME ON FLAME ON
FLAME OFF FLAME OFF
1