4.3.2 Video Loss
Click Status Switch to enable the function for the channel. if the camera is disconnected or lost video, NVR will
alarm.
You need to set Alarm Action to configure alarm actions the NVR to take when the alarm is triggered. Also, you
can schedule the alarm. Please refer to
4.3.3 IPC Alarm Input
If the IP Camera support Alarm Input, you can manage the alarm input here.
For Alarm Action and Schedule, please refer to
Copyright©2020 Jovision Technology Co., Ltd. All rights reserved.
4.3.1
Motion.
4.3.1 Motion
19